1/1/2023 0 Comments My famicom library![]() ![]() Place the socket in the empty PPU location, then place the two strips of round pin strip into the socket. The NESRGB will be installed underneath the motherboard as there is more space there. Turn the motherboard over to the solder side. This is a bit unusual – most of the time, it will not be covered. The PPU in my unit has a heat sink glued over the top marked R1292CE. Please read the article here: Desoldering the PPU. This can be tricky because the motherboard’s holes are plated through. Remove the motherboard from the unit by first unplugging the connectors from the left-hand side, then removing the screws and rod from the eject mechanism. Open the Famicom Twin by removing the seven long screws from the bottom.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |